Category Archives: VM_365 Project

VM_365 Day 262 Broadstairs industrial archaeology landmark

Archaeology, Broadstairs, Industrial Archaeology, Post Medieval, Uncategorised, VM_365 Project

VM 262The image for Day 262 of the VM_365 project is of one of the landmarks of Thanet’s industrial archaeological heritage, Crampton Tower at Broadstairs. The tower stands three stories high (24.38m) and is faced with flint, the ubiquitous building material of the small towns and villages close to the sea in Thanet. The divisions between the stories and the windows and doors are picked out with rough flint dressings and string courses. The tower and reservoir are Grade II listed.

The tower was built  to improve the supply of fresh drinking water to Broadstairs and was designed and largely funded by the English civil engineer Thomas Crampton (1816 – 1888),  a railway engineer of great ability, who among many achievements was responsible for a locomotive design, which enjoyed particular success on the continent.

Crampton was born in Broadstairs, the son of a plumber and architect. His parents managed or owned therapeutic baths at Eldon Place, Broadstairs whose warm showers were notably enjoyed by Charles Dickens. Thomas Crampton had been involved in the construction of the Berlin Water works in 1855 and formed the Broadstairs Water Company in 1859.

In the Broadstairs Water Works designed by Thomas Crampton, water drawn from a deep well sunk into the chalk was stored in a large reservoir holding 380000 litres, which was covered by an impressive flint and mortar dome. A gas operated engine, which possibly survives in the tower floor, pumped the water from the reservoir to a tank at the top of the tower, where gravity created sufficient water pressure to supply houses in the nearby area.

Crampton’s water tower is one of the significant steps in the development of Broadstairs  from a cluster of fishermen’s cottages and boat building yards into a small town with the modern conveniences that were expected by visitors to the area and its growing population in the 19th century.

For more information about Thomas Crampton and Crampton Tower, visit Crampton Tower Museum in Broadstairs.

VM_365 Day 261 Two sides to Archaeology at Drapers Mills Margate

Archaeology, From the Archives, Iron Age, Margate, Post Medieval, Roman, Uncategorised, VM_365 Project

VM 261The image for Day 261 of the VM_365 project shows two aspects of the archaeology of Drapers Mills, Margate, both from very different periods but occupying the same landscape.

In the foreground of the image the excavation of a Late Iron Age or Early Roman enclosure is taking place on the playing field of a school. The ditched enclosure is located on the periphery of the site of a Romano-British villa, which was disturbed by the construction of the school in the 1930’s and investigated by excavations between 1959 and 1961 and again in 1981.  The villa probably replaced a small Iron Age settlement, which lay within the enclosure ditch. A filled in chalk quarry from the Roman period in the 2nd century AD, located near the houses to the right of the mill in the image, produced the cast bronze head of a boxer which appeared in the image for Day 17 of the VM_365 project. A wooden box storing a collection of the samian pottery from the villa excavations of 1959 to 1961 in the same area featured in VM_365 Day 86.

In the background at the centre of the image is Draper’s Mill, a smock mill constructed in 1845 by the Canterbury millwright John Holman. A smock mill has a sloping body, with a cap at the top that rotates so that the sails can be turned to face the wind. The windmill is the last survivor of three mid 19th century windmills that that once stood together on this rounded downland hilltop. Draper’s Mill was threatened with demolition in 1965, but was saved and restored in 1968.

Early maps show windmills occupying the hilltop near Drapers Mill as early as the 17th century, and it is likely that there were earlier post mills near the site in the medieval period, standing on similar trestle platforms and possibly within circular enclosures,  to those at St. Peters and Sarre that were shown on VM_365 Day 259 and Day 260. The hilltop site overlooking the bay at Margate has been occupied for many thousands of years and its history is written in the archaeological record, both above and below ground.

VM_365 Day 260 Cropmark of Medieval Post-Mill at Sarre

Anglo Saxon, Archaeology, From the Archives, Medieval, Sarre, Uncategorised, VM_365 Project

VM 260

Today’s image for Day 260 of the VM_365 project shows cropmarks  at Sarre recorded during an aerial reconnaissance flight by the Trust for Thanet Archaeology in 1990.

The cropmarks, located to the east of the existing Sarre Mill, show an Anglo Saxon cemetery in the north east quadrant of the picture and a medieval post-mill foundation showing as a ring ditch with a cross in the centre in the south west quadrant.

Evaluation trenching by the Trust in 1990 sampled a number of the Anglo Saxon graves which have previously featured in VM_365 posts and also sampled the cropmark of the post-mill.

The Sarre post-mill is of similar form to the post-mill that was excavated at St Peters, Broadstairs. The ring ditch and cross trench at Sarre contained pottery in 13th and 14th century fabrics indicating that a windmill has stood at Sarre from at least the 13th century.

VM_365 Day 259 Medieval Post Mill at St Peters, Broadstairs

Archaeology, Medieval, Uncategorised, VM_365 Project

VM_259

Today’s image for Day 259 of the VM_365 project shows the foundations of a medieval post mill which was excavated prior to the construction of the ASDA superstore at St Peters, Broadstairs in 1999.

The Post Mill is the earliest type of Windmill in Europe. The whole structure of the mill, its sails and internal machinery were supported on a central pillar which allowed it to be turned to bring the sails into the prevailing wind. The  central pillar formed part of a trestle structure.  A cross shaped foundation, called a Cross tree, was laid in a trench and supported four angled braces called quarter bars, that propped up the central pillar. The trestle may have been buried in a mound of earth.  A tail pole was used to turn the sails into the wind.

The foundations of the trestle, visible as a cross, are shown in the centre of the ring ditch. In the image above, a number of segments have been excavated through the circuit of the ring ditch which surrounded the mill in which the tail pole would have been swung to turn the mill toward the wind.

VM_365 Day 258 Local Roman copy of a samian bowl form

Archaeology, Roman, Roman pottery, Uncategorised, VM_365 Project

VM 258

The image for Day 258 of the VM_365 project shows two views of a Roman bowl that was excavated in the grave that has featured in previous VM_365 posts  along withone of two copper alloy bracelets, a pottery beaker  and  bottle and evidence for the hob nailed shoes the young woman was buried with.

This bowl copies the form of a  samian bowl of Dragendorf 44 type. Samian pottery was generally manufactured on the continent in Gaul but like the bottle in the grave, the bowl was actually manufactured on the North Kent Marshes in pinkish red Hoo St Werburgh fabric. This vessel was difficult to date precisely although it must fall in the time bracket of AD.150-250/300; later than the introduction of the form in samian ware and earlier than the end of the Hoo pottery industry.

The bowl  has a chipped flange and there is knife scoring over the interior surface, suggesting that it had been used before being deposited in the grave.

VM_365 Day 257 Roman bottle from Ramsgate

Ramsgate, Roman, Roman pottery, Uncategorised, VM_365 Project

VM 257

Today’s image for Day 257 of VM_365 shows a Roman bottle that was found in a grave excavated in Ramsgate in 2007.  The grave has featured in previous VM_365 posts, along with the finds that were present in the grave, the individual pottery vessels and evidence for the hob nailed shoes the young woman was buried with.

This bottle is classified as Pollard type 169 and has been manufactured in pinkish-brown Hoo St Werburgh fabric. It has a chipped rim, which may have been caused by the flint which was used as a stopper. The vessel dates between  c.AD.150-250/300.

 

VM_365 Day 256 Colour Coated Roman Beaker from Ramsgate Roman Grave

Archaeology, From the Archives, In the Store, Ramsgate, Roman, Roman pottery, Uncategorised, VM_365 Project

 

VM 256The image for Day 256 0f the VM_365 project is of a Roman Beaker found in a grave excavated in Ramsgate, which has featured in a series of previous VM_365 posts, along with the finds that were present in the grave and evidence for the hob nailed shoes the individual was buried with.

The beaker is in a colour coated ware, which means that the light coloured fabric of the pottery has been totally covered with a slip of dark glaze. The exterior of the pot was decorated further buy adding a white painted lattice pattern. The beaker was possibly manufactured in Gaul, in 3rd or 4th century AD.

Perhaps a story of greater human interest represented by this vessel are the impressions of the fingers of someone who grasped the body of the vessel before the clay had dried and left a lasting memorial of their otherwise unrecorded existence.

The survival of the intact vessels on the small archaeological site, despite the demolition of the buildings above and the use of a large toothed mechanical excavator bucket to grub out the foundations of the building that stood above it, is a matter of incredible luck.

VM_365 Day 255 Roman Hobnails in a grave from Ramsgate

Archaeology, In the Store, Ramsgate, Roman, Uncategorised, VM_365 Project

VM 255

Today’s image for Day 255 of the VM_365 project follows on from yesterday’s journal post about the late 3rd to early 4th century burial at Ramsgate. It shows one of the best preserved of the 29 hobnails excavated from the grave along with a location plan of where they were found.

It is not clear  if all the hobnails survived and, as the grave had been heavily disturbed by plant roots, it was not possible to determine the exact pattern of hobnails. Two groups of hobnails were identified presumably representing two seperate shoes which may have been worn by the young adult female when she was buried.

Hobnails were used to prolong the life of footwear which was usually made entirely of leather and to give them a better grip on the floor surface.

VM_365 Day 254 late 3rd to Early 4th Century grave from Ramsgate

Archaeology, From the Archives, Ramsgate, Roman, Uncategorised, VM_365 Project

VM 254

Today’s image for Day 254 of the VM_365 project shows a late 3rd to early 4th century Roman grave, excavated in Ramsgate in 2007.

The grave was orientated north east to south west and had been heavily truncated in the past from later activity on the site. The grave cut measured only 0.3 metres deep when it was excavated.

The skeletal remains were of a young adult female, laid on her back with her legs extended and the left arm slightly flexed with the wrist resting on the pelvis. The bones of her right arm were very fragmentary and their exact position could not be determined. The general condition of the skeleton was poor as no hand, ribs, spine or foot bones survived and most ends of the long bones were missing.

The woman had been buried wearing a twisted copper alloy wire bracelet on her left wrist and she may also have been wearing shoes as twenty nine hobnails were recovered from the end of the grave in the approximate location of her feet.

Ten iron nails found around the edge of the grave suggest that a wooden board had been placed over her body. The body was accompanied by three pottery accessory vessels – a bowl, a bottle and a beaker placed at the end of the grave on top of the board, along with a second copper alloy bracelet  and a loop of wire which may have fastened a fabric pouch.

The bowl was located over the right lower leg, the loop of narrow copper alloy wire with two twists or knots which may have fastened a fabric pouch was found under the rim. The beaker had been placed on the north western side of the grave and the bottle, apparently sealed with a stopper made from a natural flint nodule, had been place on the south eastern side. The copper alloy bracelet lay between the bottle and beaker.

This burial is very significant as it complements the antiquarian records of similar discoveries in the immediate area which were published by Robert Hicks in the 19th century.

 

VM_365 Day 253 Roman Copper Alloy bracelet

Archaeology, In the Store, Ramsgate, Roman, Uncategorised, VM_365 Project

VM 253Today’s image for Day 253 of the VM_365 project shows a Roman copper alloy bracelet found within the 3rd to 4th century grave of a young adult female at Grange Road, Ramsgate in 2007. The complete pennanular bracelet is shown in situ in an image for Day 58 of VM_365.

The bracelet measures approximately 75mm in diameter and is made from four strands of wire twisted tightly together to form a single length. The diameter of the twisted wire measures approximately 4mm with each strand measuring 1mm. The ends of the bracelet fasten together in a hook and loop with the hooked end formed from a single strand of the wire reinforced with a flattened copper alloy strip clamped it to prevent unravelling. The looped  end of the bracelet is formed in a similar way but with a single strand of wire bent over on itself and clamped with a strip of metal. The wire forming the looped end of the fastening had been beaten flat.

When it was originally deposited at the foot end of the grave, the bracelet would have been beautifully shiny and almost the colour of gold although now it has become corroded over time and is coloured green.